Some Completed Installations

Ref 1.1

Premier Furniture Solutions completed the interior fit-out and furnishing of a new floor in London for this company in 2002. We were awarded the contract to design the layout and to furnish it following a competitive tender, having previously carried out furniture moves and supplied small quantities of furniture.

Ref 1.2

The project was designed by our own specialists, whom prepared CAD drawings for client approval, and then managed and installed the Assmann storagewall, Fumac desking and Rabami seating.

Ref 1.3

Glazed partitions with integral venetian blinds were used to form offices and meeting rooms, which had cherry veneer doors.

Ref 1.4

As our client continued to expand, in 2006 they relocated part of their Company to temporary office space 30 miles away . We helped design the floor space-plan, and provided new workstations, storage and seating to central areas, meeting rooms and reception. Our Company also undertook the move management and carried out the phased removal. This simple reception unit is from Fumac's Aero range.

Ref 1.5

The reception, whilst simple and cost-effective, is a welcoming, stylish area to meet and greet visitors to the Company.

Using club chairs in a luxurious soft fabric, with cherry veneer coffee tables, the area also serves as a temporary space for impromptu and informal meetings.

Ref 1.6

These cafe-style tables and chairs were provided for the kitchen /break-out areas for staff to get away from their desks, grab a drink or have lunch.

There are a selection of these tables and chairs available from our on-line shop

Buy Cafe Furniture now, click here

Ref 1.7

This is one of many runs of floor to ceiling storagewall cupboards throughout the project. This offers the Client highly efficient filing space both on shelves and with pull-out filing frames. The ability to adjust internals in 25mm increments allows every cubic metre to be used.

Assmann Invitass storagewall was used against the walls, whilst other cupboards from the range were used in several other heights from 720mm desk height to 1570mm, which segregated departments.

This serves to break up areas, provide local filing plus offers positions for fax machines and workgroup printers - getting them off of the desks. Cables are run between the cupboards and into floorboxes below.

Ref 1.8

Fumac profile cherry veneer workstations with screen solutions elevation screens form the majority of the working areas. The smaller desks allow more people to work within the floorspace, whilst, as the photo illustrates, it remains very spacious.

This is achieved partly by using storagewall to maximise filing space, but also by strategic use of medium and low height Assmann storage from the same range.

Ref 1.9

Meeting rooms were equipped with various Fumac Fazet cherry veneer tables and Anna chairs

In this case, the table is boat-shaped and extendable, by adding extra leaves. Other tables used include smaller Fazet tables in one piece tops and round cherry tables from the Fumac Nova range.

References are available

Ref 2.1

Premier Furniture Solutions furnished this facility for a leading Formula One engine manufacturer in early 2007, having previously worked with the Company for ten years.

Cupboards were Assmann's InvitAss storagewall and medium height storage. All of the cupboards were connected with common tops to form "corrals" where departments could work, whilst retaining the overall open plan concept they required.

Ref 2.2

The image illustrates the precision with which the cupboards were installed, achieved by using lasers and carefull installation by our own team. 3mm spacers were inserted into some runs to ensure that cupboards were symetrical and completely asligned as this floor is visible from above.

References are available.

Ref 3.1

Shetug Avant presidential workstations were selected for this City bank for the senior managers. Normally available in beech and mahogany, the architect requested a special dark stain to match the built in joinery units.

References are available.

Ref 3.2

The striking interior design of this bank project was by EADL, and featured special rugs, reception seating and reception desk supplied by Premier Furniture Solutions.

We were responsible for the furniture supply and installation and the management and completion of the relocation. We moved the bank over a long-weekend, ready to start business Monday morning.

Ref 3.3

This special dealer desk unit was a custom design solution between FFC and Premier Furniture Solutions to meet the bank's needs.

Special cupboards were built into a surrounding desk module to allow access to several computers and all of the cabling, from either side. The computer units were hidden by double doors with ventilation grilles.

Ref 3.4

The Dealers were also supplied with special mobile pedestal units for their personal storage. These were slightly shallower than normal and featured bumpers to prevent damage to the cupboard doors behind them and were easy to move them when required. The unit featured central desk sections which could be removed easily to pass cables down to the void below.

Ref 3.5

FFC Balancia beam system workstations were previously supplied to the Bank and these were relocated from their existing premises. The furniture remained in excellent condition and was easily reconfigured to suit the new layout.

Ref 4.1

This leading company had a problem with storage as they had a number of boxed-in pipes on the wall, preventing cupboards going against the wall. We removed the boxing, and exposed the floor slab.

We then fitted special 440mm deep Assmann InvitAss cupboards on the floor, and cut the backs of the cupboards away to make access to the pipes possible. These low cupboards were then fitted with tops and 2m high cupboards, 600mm deep to fit over the pipes.

Ref 4.2

This image illustrates the access that was possible to the pipes behind.

Ref 4.3

The finished storage wall, offering high capacity storage in an area where it just wasn't possible with traditional methods, and without the creative and constructive ability of Premier Furniture Solutions team.

References are available.

Ref 5.1

With a large requirement for additional storage, we proposed a storagewall solution for this fruit distribution company.

This run of cupboards incorporated shelves and filing frames behind the cupboards doors, with open shelves for display purposes. A projector screen was fitted above the open shelves on the ceiling scribing panel, and it pulled down for tv projection and presentations to customers.

The units were Assmann InvitAss storagewall cupboards in beech effect melamine finish.

Ref 5.2

At the end of the ceiling height storagewall run, we built this sink unit into the base unit and suspended a "top cupboard" from the wall.

The pipes were run through the back of the cupboards to ensure a neat installation.

Ref 5.3

This storagewall run hid the stairs from the client presentation area.

Ref 5.4

In the accounts department we used these cupboards to maximise filing capacity on two walls. The corner cupboard has been discontinued now, but we can utilise corner space in other ways.

In the foreground just out of shot, are steps down towards the storage, creating a change of height. We filled the space between the cupboards and the wall by suspending an open shelf unit between the two, ensuring there were no unsighly dust traps.

Ref 6.1

For these compact offices we utilised smooth-flowing beech finish Balancia workstations from FFC with wall mounted cupboards and storagewall units from Assmann's InvitAss range.

Ref 7.1

This home office was created for a local customer in the their spacious bungalow. As a senior manager whom often worked at home when in the UK, he needed a workplace where he could work quietly and efficiently.

A large corner workstation with return and circular meeting extension from the Assmann Esitass range was chosen, in a beautiful birch veneer finish, complete with vertical and horizontal wire management.

Ref 7.2

On the opposite wall we installed a combination of low and high storagewall cupboards, from Assmann's Invitass range. These birch veneer units framed the window using birch worksurfaces and cladding panels. Low voltage halogen lights were fitted in the specially produced top section. The units housed shelves, pull out filing frames and glass fronted display units.

Ref 8.1

This corner desk and meeting extension are from FFC's Elements range, in birch effect melamine finish and have optional full panel legs.

The ergonomic desk chair is a Rabami 870 and the guest chairs are from Rabami's combo range.

Ref 8.2

This special entertainment unit was constructed from Assmann's InvitAss storagewall cupboards, specially modified by our own team to suit this installation. The cupboards housed a sink, a small fridge unit and a electrically lifted bar unit.

The units were maple (birch) effect melamine with special blue laminate tops, and the wall mounted cupboards have glass doors.

Ref 8.3

The smaller cupboard was to be used as a drinks unit when entertaining. It is fitted with it's own section of top and lifts up from within the larger cupboard, powered by a remote control operated electonic lift.

Ref 8.4

FFC Elements barrel shape (or boat shape) conference table in birch effect finish with cruciform bases.

Chairs are Rabami's Combo model covered in luxurious Gabriel Comfort fabric.

The chairs and table are both available to purchase on this web site.

Ref 8.5

The administration office was completely fitted out with storagewall cupboards from Assmann, to maximise the available space for filing.

The glass doors help to break up the otherwise solid expanse of maple finished doors.

Ref 9.1

This headteachers office was created using a Assmann Rondass workstation, surrounded by Assmann Invitass storagewall cupboards, all in maple effect finish.

Task lighting was fitted underneath the cupboards, with a custom soffit to diffuse the light.

Ref 9.2

The opposite wall was fitted with floor to ceiling storagewall to provide filing space, and display areas for school awards.

Ref 10.1

This office was created for a Computer Recruitment Company using FFC's Balancia wave desks in beech effect finish.

The desks were installed in rows to encourage team working and they were fitted with above desk tool rails to hold letter and accessory trays.

Ref 10.2

The storage in this office was once again from Assmann, Invitass beech effect cupboards, which perfectly match the FFC desks.

The cupboards were installed around the window and in alcoves to provide not only filing storage, but coat hanging space.

Ref 11.1

This Council's inward investment office was equipped with a Shetug Avant range mahogany veneer finished table with a black leather insert. This helped to create the environment they wanted to impress visitors to the town.

These tables are available in a number of sizes in both mahogany and beech veneer finishes and are surprisingly well priced considering the quality.

Ref 12.1

We were asked to visit a school to discuss solutions to their filing requirements. The office was a mixture of disjointed cabinets and cupboards.

Our favourite solution to this problem comes from Assmann, and the results are below.

Ref 12.2

The school now has floor to ceiling cupboards that offers shelved storage for all of the pupils files, accounts files and other administration files.

Assmann's InvitAss cupboards were selected again, in this case in beech effect melamine. This is a perfect example of the difference that our solutions can make to customer's requirements.

Ref 12.3

At the end of storagewall run we produced this solution to accommodate the school safe, which had to remain where it was. This is further evidence of the flexible solutions available.